How to fix a broken flashlight

how to fix a broken flashlight

How to Fix Flashlight Not Working on iPhone after iOS 11/11.1 Update

You can take off the tail cap of the flashlight, and with the batteries in the light, if you can take a piece of metal, you can use a set of tweezers, or what I typically recommend is a paperclip. You put the paperclip flat against the negative end of the battery while it's in your flashlight, and push down with your thumb until the paperclip is touching both the battery, and the rim of the flashlight. Sep 29,  · First, I decided to fix the charger. At the bottom of the flashlight, there was supposed to be a plastic stick, with a tiny plastic circle at the top, and at the bottom of it, the charger was supposed to be glued to it, so people could grab it, and pull it so the charger comes out of a hole, so people could charge the flashlight, but, the pieces where apart, so I glued them together.

Hello and welcome back how to keep stamina during intercourse Fenix Store once again. Today we will be covering some of the most common and basic troubleshooting steps that you can go through any time if your light has stopped working, or we often we'll ask you to do these troubleshooting steps before you send it in for a warranty work.

The troubleshooting page is really there to benefit both the store and the customer, and we encourage you to make use of it, and of course you can use it in conjunction with our customer service.

We are always happy to hear from you, and to answer any of your questions. If you check out the troubleshooting pageand your light is still not working you can of course give us a call, and we'll be happy to follow up with you on this, or of course get you a return authorization number if necessary.

The most common problem that we experience with people is just simply that their flashlight isn't working. There are many how to ease eye strain for this to have happened.

There are lots of reasons that the light might have broken, or piece in the circuit board may have broken or come loose, or it could be simply as easy as replacing a battery.

The number one reason that we get people calling in and sending in flashlights is simply because the tail switch it doesn't work. How to fix a broken flashlight Switch Issues. It definitely sometimes can appear that the tail switch is in fact broken, but typically the problem is not that the tail switch is broken, it's just that it is a bit loose in the housing.

The way that you fix that, is that on most of the flashlights, you are able to take off the tail cap piece. If you do, and you look at the inside of the tail cap, you'll see that there of course is a spring that comes out. Now, that spring is attached to how to install ubuntu in vmware workstation 9 tail switch.

Around that spring, there is a silver ring on either side of the spring, normally will have two small indention's in it. This is the, what we call, the, "Silver ring," or we sometimes refer to it as a, "Silver washer," or even sometimes a, "Silver O-ring. You can take a spanner wrench, or a pair of needle nosed pliers.

Or, if you don't have either of those, you can even use tweezers. Tweezers are a little more difficult to use. Basically what you're going to do is just stick them in between those two holes, or stick each of the needle noses, or the piece of spanner wrench in those little holes, and you're going to turn it counterclockwise to the left. There are some of the older flashlights that will actually turn right as a normal screw, but normally, especially in the more modern items, the more modern units, it will be a reverse threading.

That's to help prevent it from becoming unscrewed by accident when you screw on and off the tail cap while changing batteries. Basically again, you will turn the silver ring to the left until it is completely tight, and then simply put the tail cap back on the flashlight and try it again.

This how to fix a broken flashlight the same way that you will also go about replacing the tail switch if we send you a replacement tail switch, you will just turn it to the right.

How to polish brass with household items, the reverse threading to the right, to completely loosen and then pull on the spring to remove the switch.

Then you'll just want to pay attention to the order that the different pieces come out in, and make sure you put the new switch back in with the other pieces in that same order. Always make sure that you do not put any LocTite, or any other sort of threading glue on the O-ring.

That is just in case the tail switch does ever need to be repaired, if you put the LocTite on there then it will be basically impossible to get the silver ring off, and therefore we'll have to replace the entire tail cap in the event of a tail switch malfunction.

A whole tail cap is a lot harder to get a hold of than just the switch, so that's why we recommend not using the LocTite. We do recommend that you occasionally check, tighten that silver ring down, even if you aren't having a problem. Just because, like I said, it does, even with the reverse thread, it does get a little loose, very, very small bits at a time.

Until eventually it may become so loose that you can't use the flashlight. A good way to prevent that from happening in the first place is just to tighten that silver ring down every now and again, just in case. Keep in mind that this is not a fix for every flashlight, not every one of our flashlights has that silver ring. But a good portion of them do. Flashlight Body Adjustment. The next thing that often will cause a light to not turn on, especially in our models like the PD35, and UC35 where all of the pieces go on, the head piece, and the tail piece go on either side of the body.

People think sometimes that they can swap those two pieces around to switch where the pocket clip goes, but it is required that they are put on the correct ends. The tail cap piece should go on the side next to where the pocket clip hugs the flashlight. Think about it like if you were to put the flashlight in your pocket using that pocket clip, the light should be facing down into your pocket.

The reason for this is because the threading on both sides is not exactly the same. One side is longer than the other. If you put them on the incorrect sides, it will not make a full connection, and therefore not be able to light.

That is a good thing to, another good thing to check if you're having trouble, if the light is not turning on, just make sure that your head and your tail pieces are on the correct side. Obviously another thing that you can do is of course check your batteries. You can try out new batteries, if you have others.

If you have other sets of batteries, or if you're using theif you have another one that you can use. For some of those batteries, the more expensive ones, I know many people will only have one. If you can go to a store and ask to try one at a store that might use them, or like a store that sells flashlights, or perhaps ask a friend if they have a flashlight that uses an Fenix Another trick to do if you're still having trouble, and this is for efficiency stake, if you do this before you call in and you tell us about it, this will just help us to help you more quickly.

You can take off the tail cap of the flashlight, and with the batteries in the light, if you can take a piece of metal, you can use a set of tweezers, or what I typically recommend is a paperclip. You put the paperclip flat against the negative end of the battery while it's in your flashlight, and push down with your thumb until the paperclip is touching both the battery, and the rim of the flashlight.

Flashlight Output Test. This is bypassing the tail switch. We're using that how to celebrate your 30th birthday in nyc to replace the tail switch, and connecting the battery to the outside of the flashlight, and making an electrical connection to turn it on.

That way if you do call us and tell us that you've done the switch diagnosis, then we'll know that it is in fact either your tail switch, or maybe the tail cap that is not working properly.

That is just, that'll help speed things up. The troubleshooting page on Fenix Store. If you are interested, you can always go and watch that if the description here was not good enough. If you have any other questions about anything like that, just give us a call, or send us an email and we'd be happy to help you out at any time.

Thank you very much for coming in today, and you have a good day. Free U. Fenix Loyalty Program. Tail Switch Issues It definitely sometimes can appear that the tail switch is in fact broken, but typically the problem is not that the tail switch is broken, it's just that it is a bit loose in the housing. Flashlight Body Adjustment The next thing that often will cause a light to not turn on, especially in our models like the PD35, and UC35 where all of the pieces go on, the head piece, and the tail piece go on either side of the body.

Flashlight Output Test This is bypassing the tail switch. Low Prices! Shipping Some Exclusions. Quick Delivery Ships Within 24hrs.

How to Fix iPhone Flashlight Not Working after iOS 11 Update

Aug 16,  · Step 5: Use a Thin Object to Pry Open the Switch Through the Holes on the Sides. if your Switch Does not Have Holes on the Sides Then use Something very thin. like a flat head screwdriver to wedge between the Side Crack of the switch (But Be careful not to cut yourself) Ask Question. Nov 15,  · How to Fix iPhone Flashlight Not Working after iOS 11 Update Tip 1. Close Camera/Flashlight App. Completely quit the Camera app or the Flashlight app by double tapping on the Home button, and find it and swipe up to close Camera or Flashlight app. Then open the app and check if it is working now.

I am a seventh grade boy from Monterrey, Mexico, and I want to fix a broken flashlight and make it better because I think that if something breaks you should not throw it away, and, instead you should try to fix it and make it better.

I know many people have different, more complicated flashlights, but mine was very simple inside. It also used a charger, so it was a reusable flashlight. How it works is you just put the charger into the outlet, and it is supposed to charge, so when you use it, it is supposed to turn on. These are the steps that I have come up with:. This step was the easiest step do far. First, I had to cut the stickers all around it.

Then, I had to get all of the nails out with a screwdriver. Lastly, twist the top part of the flashlight where the light comes out of and It would open. This step was a bit harder, but I am lucky that my flashlight was very simple inside. I already saw that two of the cable's were cut, and the charger was broken, but, what I did notice was that there was a little green light on the battery, which meant that it was charged, but it did not turn on.

So, that meant that either it did not work because of the cable's, the button did not work, or something was wrong with the circuit board. First, I decided to fix the charger. At the bottom of the flashlight, there was supposed to be a plastic stick, with a tiny plastic circle at the top, and at the bottom of it, the charger was supposed to be glued to it, so people could grab it, and pull it so the charger comes out of a hole, so people could charge the flashlight, but, the pieces where apart, so I glued them together.

Inside, there are pieces that are connected by cables, and are supposed to transport electricity. In the first piece, the charger was supposed to be touching the metal, which transported the electricity to where it needed to be, but, the charger was not touching the metal, so I pushed into place, and when I tested it, and it started charging!

Then, I started to work on the cables. First, I had to cut of insulation and exposed wires. Next, we had to solder the wires to the accumulator.

Then we tried to test what was broken, and we did it by exception. First we tried the batteries. We pressed the button, but it still did not work. Then we tried to see if the button was broken. There where two legs at the bottom of the button. So, finally, we soldered the flashlight and the wires, took another flashlight's light, and soldered the old flashlight's wires to the new flashlight's light, and when we tested it, it worked!

That is how we fixed our old flashlight. Question 1 year ago on Introduction. Reply 2 years ago. These are the steps that I have come up with: Steps: 1. Open the flashlight 2. See what the problem is. Fix it! I know this is not very in depth, but I did not know what the problem was back then Materials we will need for this project: -A screwdriver -Scissors -Hot glue gun -Soldering iron -Solder -Batteries.

Participated in the Fix It! Contest View Contest. Did you make this project? Share it with us! I Made It! RickeyD2 Question 1 year ago on Introduction. Answer Upvote. BrianH 2 years ago on Step 3. Reply Upvote.

4 thoughts on “How to fix a broken flashlight

Add a comment

Your email will not be published.. Required fields are marked *